My Shopping Cart
BMW ICOM MaxiSYS UPA Digimaster 3 OPCOM Trouble Code Reader ICOM A2 bmw key programmer SBB Key Programmer NEXIQ super vag k can 4.8
Home - Products - Other OBDII Vehicle Tools - 5.5" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +Tire indicator
« Go Back

5.5" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +Tire indicator

Item No. :HUD09
5 stars, 1 reviews.
Out of Stock
Buy it Now:US$159.00 
Shipping:
Free Shipping     Standard Flat Rate Shipping Service 
Estimated delivery time: 7-18 working days.See details»
Weight:
0.5KG        ( 1.1LB )
Returns:
Return for refund within 7 days,buyer pays return shipping.Read details »
Buy more related tools and Save more!
Car Multi-Function Information Display OBD General Trip Computer Y01
(Item No. HUD08)
The car Y01 Multi-Function information display (also named Trip Computer)is a multifunctional, omnidirectional car info display device special designed for drivers. By Trip Computer, the users can not only know most of the car information, but also can setup the inner function of their car to make it more personalized and humanized.    More Details »
Latest price: US$66.99Buy it Now: US$54.99  18%  You save US$12.00 Free Shipping
Quantity:   
Add to Cart
New 5.5" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +Tire indicator

With new function!!!
Tire indicator
Tire pressure and temperature display area
Tire pressure unit
Tire temperature unit
New 5.5" LED OBD-II HUD Head Up Display Over Speeding warning/speed/Km rpm/shift light/temperature +Tire indicator

Attention: This device work with the car after 2003 with OBD adapter.

Function:


1.       Speed: The number can indicate the current speed.
2.       Unit marks: V-voltage, ℃-degree Celsius, ℉ -degree Fahrenheit , KM-Kilo meter , MPH-Mile , KM/H- kilo meter per hour
3.       Gear shifting reminding: It will remind the driver to gear up to save fuel when the engine speed and vehicle speed come to a certain ratio.
4.       Battery voltage: when the battery voltage is less than/reaches 12v, the caution light will light up to remind.
5.       engine revolving speed icon
6.       Rotation speed: indicates the rotating status of the engine and the scale measured represents the speed reached.
7.       Light sensors , brightness can be changed with change in the outside world
8.       Engine failure icon:The icon will light up when engine break down
9.       Buzzer mark: press the switch button to turn on or turn off the sound of the buzzer.
10.   Fault code
11.   Multi-functional display area:Toggle to display instant 100KM fuel consumption /instant fuel consumption /revolving speed/ fault code
12.   Engine revolving speed unit
13.   Instant 100KM/instant fuel consumption unit :displays fuel consumption of one hundred kilometers when the vehicle is moving, in L/100km.
14.   Tire indicator
15.   Tire pressure and temperature display area
16.   Tire pressure unit
17.   Tire temperature unit
18.   Drowsy driving indicator reminding
19.   Overspeed reminding: the icon of overspeed will flicker and alarm when the vehicle exceeds the speed limit set up in advance.
20.   Setting status indicator
21.   Water temperature: When the temperature reaches 100 degree centigrade, alarm will be given automatically with alarm light turned on.
First time to use 
 When you have connected the HUD display, the OBD cable and the car TDCL, start the vehicle and turn on the HUD power supply switch, then you will see the boot screen, "HUD" will be displayed flickeringly.

Technical Parameters

Preparation Before Installation and Use
 
1. Know the type of your vehicle. , only when the type of your vehicle meets the OBDII standards, can the HUD be normally used on your vehicle. Open the engine hood and find the paster below it (see the picture below), if it has words like OBDII CERTIFIED, then HUD can be installed. Check if there is a test diagnostic communication link (TDCL) under the steering wheel. (Most of the vehicles produced later than 2006 in China have been equipped with a TDCL)

2. Find out the 16 pin diagnostic link (see the picture below) of the vehicle and connect it well with OBDII connecting line. As different types of vehicles have different positions for diagnostic link and some are relatively narrow, patch cord can be purchased.

3. OBD interface Put the give-away non-slip mat at the flat place in front of the navigation bridge, and then you can place the host machine of HUD on it and adjust its location at any time.
4. The reflecting film should be pasted right above the H101 host machine and it should be able to reflect to the screen of the host machine..
 
Methods of pasting the film:
 
A. Uniformly water the place where the film will be pasted on ;
B. Rip off the covering layer of the film , and water both sides of it , and paste it to the right place.
C. After you have adjusted the location well, you can use a scratch board or something else flat to slick the film and squeeze the water inside out until there is no bubble or water in it.
D. A few minutes later, the moisture inside the film totally evaporates , then you can finish this by wiping away the water and dust around.
 
Package including:
 
1pc x Host machine of HUD
1pc x Reflecting film
1pc x OBD2 Connecting line
1pc x Instruction Manual
1pc x Non-slip mat
 





Contact Information:


Live Support: Chat with us online
E-mail: Sales@worldobd2.com 
Skype: wobd2.com 
What'sapp:+86-18584531639

Scan WOBD2 QR Code By Mobile Phone



Write a Review
* Rating:
    Please select rating stars.
* Your First & Last Name:
* Your E-Mail Address:
* Review Detail:
*Verification Code:
      9715    No right? Get a new Verification Code
 
Tell us what you think about this item and share your opinions with other people. Please make sure your review focuses only on this item. All reviews are moderated and will be reviewed within two business days. Inappropriate reviews will not be posted.
After-sales questions and issues: Contact our Customer Service Department. (A customer representative will get back to you).
Please Sign In first if you want to later edit or manage reviews uploaded by yourself.
Shipment & Payment
Return Information
Customer Service
  Join our community:

WOBD2 facebook wobd2 youtube WOBD2 blog 
  Newsletter get Coupon: