Airbag light on, turn off airbag light with airbag reset tool
A number of drivers tend to ask "My Airbag Light Stays On. Is It Safe To Drive This Way?", some drivers think not safe and even break the law, say "Driving a car that has airbags with the airbag fuse removed (disabling the air bag) is illegal in most countries"; also some drivers think it safe. Why airbag light on and what we should do? The SRS airbag light on because the BCM detects a fault in the SRS system and the air bag light is on the system is not working and will not deploy in the event of an accident, If the airbag has been deployed then you obviously need to replace the airbag and possibly the SRS module, or you should have it reset by a airbag reset tool.
Supplying airbag reset tools for obdii and canbus compliant cars, these cars work with Honda, Mercedes Benz,BMW, Opel, vw, Audi and more cars made. SRS reset tools support display all SRS fault codes and reset the "SRS" light. No need pc to connect, only need a interface to plug into the car's socket.
ESL Resetter for MB
For GM vehicles equipped with a 315 or 433 MHz Tire Pressure Monitoring (TPM) system, a "Sensor Re-Learn Procedure" must be performed after tire rotations, Remote Control Door Lock Receiver Module replacement or Tire Pressure Sensor replacement. This re-learn procedure can be performed by using special tool EL-50448.
Also works on 2014 GM models
Service Light Reset Tool for VW/Audi re-sets service lights on Volkswagen and Audi vehicles, including the latest CAN vehicles with Conditional Based Servicing (CBS). Many VW and Audi vehicles feature the ability to adapt the oil change interval to driving conditions, with Standard and Long Life oil change settings. This reset tool has been developed with "Long Life Oil" service interval functionality. In addition to service light reset, the tool extinguishes the airbag (SRS) warning lamp across the complete VW/Audi range of vehicles.
SBC Tool ABS/SBC System Repair Tool for Mercedes for Mercedes using DAS to check and diagnose the ABS/SBC system in Mercedes Benz's W211 and R230, these faults will be showed: CODE C249F, OPERATING TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT).
We supply SBC Tool ABS/SBC System with unlimited technical support.
10 in 1 service light & airbag reset tool is an essential tool for resetting of oil service light, service warning light, service mileage, service intervals and airbag warning light on European made vehicles.
We supply 10 in 1 service airbag reset tool with unlimited technical support.
Diatronik Support Dash mileage correction via OBD2
Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2016
Diatronik Support Airbag Calculator via USB
Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.
Service Reset & EPB Electronic Park Brake Tool for Volvo
Special BDM+4Adapter for CG100 Airbag Restore Devices Renesas Infineon
CG100 software version over 3.0, must use this new BDM+4Adapter to update.
CG100-airbag tool exclusively designed to read Infineon Tricore MCU’s over CAN-bus.Supports Read/Write EEPROM function for secured and non-secured SAC-TC1766 SAC-TC1767 SAC-TC1796 SAC-TC1797 microcontrollers.comes with Mileage, DPF, ECU system time, ISN built-in calculators.Edit CRC Eeprom.
EPB Service Tool for VW/Audi
This innovative NT630 Elite ABS and Airbag Reset Tool with SAS Funcyion does not only have extensive coverage of vehicles but also provides accurate and professional diagnosis of ABS and airbag faults. This new NT630 scanner is just the perfect tool that professional mechanics can’t wait to have.
Airbag Universal Repair 2016 Version is the best software aimed at repair of an airbag ECU, accompanied by a graphical interface. It's very simple and intuitive.
The ATM adapter suppports:
- 35080 35160 DQW080 DQW160 35080V6 VP,
- parallel FLASH Zhiwei anti-theft cancellation,
- 8-pin chip,
- ATMEGA re-use
Attention :The ATM adapter cannot be used alone; it must be used together with CG100 PROG III Airbag Restore Devices.
The OE581 handheld scan tool is designed for technicians and home users to read/write fault codes, retrieve generic P0, P2 and P3 and U0 codes, get manufacturer specific P1, P3 and U1 codes for EOBD, OBDII and CAN compliant vehicles. Also, it can store freeze frame data for later evaluation and display the monitor and I/M readiness status.
New CG100 Airbag Restore Devices includes all functions of XC236x FLASH Programmer and Renesas Repair function.