Odometer Correction Tools


Odometer Mileage Correction Programmer

 
Odometer correction tool, Mileage Programmer,Mileage correction programmer, Speedometer Recalibration which have many other names like: KM adjust tool, odometer correction, mileage correction tool, speedometer reset tool, dashboard repair kit, allows people read and change odometer data. Those KM tools are Tacho Pro 2008, Digimaster 3, NEC Programmer, mileage master, CAS3 programmer, R270 CAS4 programmer, Fiat KM tool, Opel KM tool, and so on.
 
WOBD2.com supply Mileage correction tool with unlimited technical support and worldwide shipping.
 
BEST
Genuine Hand-held USA Prog Full Version Odometer Correction Tool

Genuine Hand-held USA Prog Full Version Odometer Correction Tool

US$5,215.00
  • Item No. SM45

USA PROG Full package is the best odometer correction tool for USA cars. Hand-held one, very easy to use; with usb 2.0 port to update software or download/upload data; USA adapter, CMM adapter,OBD cables are in package. Including VW/AUDI 2007+

BEST
OBD2 Odometer Correct and Immobiliser Key Programming Tool for Ford

OBD2 Odometer Correct and Immobiliser Key Programming Tool for Ford

Latest price:US$42.99
US$39.997% off
  • Item No. SM51
  • Free Shipping

Ford OBD2 Tool is a newly released lightweight and friendly OBD device. It is used to mainly perform Ford instrument calibration and immobilizer key matching.

KM  TOOL for FIAT  via OBD2

KM TOOL for FIAT via OBD2

US$21.99
  • Item No. SM25
  • Free Shipping

KM TOOL for FIAT correction by OBD II, it is easy to change most for Fiat Cars by OBD II. It is the first choice for Fiat KM Correction! We supply the fait km unlimited technical support with free, and our price is reasonable and competitive.

NEC Programmer Free Shipping

NEC Programmer Free Shipping

US$49.99
  • Item No. SM03
  • Free Shipping

NEC Programmer is a Dash Programmer or ECU Flasher designed for Vehicles using the NEC MCU such as Citroen, Peugeot, Hyundai, Honda, Suzuki, Renault, Opel, Alfa, Chevrolet (please refer to the Applicable Models below). The device allows you to modify/reprogram your car's computer or correct the odometer reading.
We supply this tool with unlimited technical service, high quality, wholesale price and one year warranty.

BDM Frame with Adapters Set Fit original FGTECH B Version

BDM Frame with Adapters Set Fit original FGTECH B Version

Latest price:US$34.99
US$24.9929% off
  • Item No. SM40-B
  • Free Shipping

BDM Frame with Adapters Set Fit original FGTECH B Version

BDM FRAME Adapter Only Adapter

BDM FRAME Adapter Only Adapter

US$13.99
  • Item No. SM40-BZ
  • Free Shipping

BDM FRAME Adapter Only Adapter

HOT!
X-PROG V6.12 Box ECU Programmer With USB Dongle

X-PROG V6.12 Box ECU Programmer With USB Dongle

US$179.00
  • Item No. SM53
  • Free Shipping

X-PROG V6.12 Box ECU Programmer With USB Dongle
Add new authorization: AUTH-0025 Authorized 11/4/2014
No operation system limitation, software can be in stalled on Windows XP, windows 7
This is the only version XPROG-M can decypte new version BMW CAS4.

BDM Frame Pin

BDM Frame Pin

US$11.99
  • Item No. SM40-PZ
  • Free Shipping

BDM Frame Pin

OBD2 Odometer Correct and Airbag Moduel Repair Tool for Mazda

OBD2 Odometer Correct and Airbag Moduel Repair Tool for Mazda

Latest price:US$42.99
US$39.997% off
  • Item No. SM50
  • Free Shipping

Mazda OBD2 Odometer correct and Airbag module repair tool, especially for Mazda vehicle from 2005-2015.
It is OBD2 user friendly tool, used for calibrate odometer and airbag repair.

BEST
Mileage Correction tool Digimaster 18

Mileage Correction tool Digimaster 18

Latest price:US$799.99
US$749.006% off
  • Item No. SM42
  • Out Of Stock

DigiMaster 18 is a programming machine with multifunction which can connect computer through the USB access. Apart from the ordinary functions, there are special models function

BEST
XPROGM V5.5.5 Especially For BMW CAS4 Decryption With T420 Laptop ECU Programmer

XPROGM V5.5.5 Especially For BMW CAS4 Decryption With T420 Laptop ECU Programmer

US$599.00
  • Item No. SM48
  • Out Of Stock

This is newest version of XPROG-M ECU Programmer, XPROG-M V5.5.5 is the only tool can decryption BMW CAS4. The package come with T420 laptop, Hard disk and USB Dongle. Software is preinstalled, you can directly use when you receive the package.

BEST
BDM FRAME with Adapters Set Fit original FGTECH

BDM FRAME with Adapters Set Fit original FGTECH

US$42.99
  • Item No. SM40
  • Out Of Stock

FGTech Galletto 2-Master BDM Adapters Set FRAME

BEST
V4.94 Digiprog III Digiprog3 Odometer Master Programmer For Sale

V4.94 Digiprog III Digiprog3 Odometer Master Programmer For Sale

Latest price:US$215.00
US$179.0017% off
  • Item No. SM47-D
  • Out Of Stock

V4.94 digiprog 3 is latest version of Digiprog3, add more car models on the basic of V4.888. Digiprog3 is a cost-effective mileage correction tool, which supports multi-language and full range or vehicle.

BEST
New Arrival Tacho Programmer Tachograph Programmer CD400 blue

New Arrival Tacho Programmer Tachograph Programmer CD400 blue

Latest price:US$879.00
US$769.0013% off
  • Item No. SM49-B
  • Out Of Stock

Tachograph programmer (Tacho) CD400 blue is designed for verification, calibration and configuration of control devices (tachograph) when installed on vehicles. The device allows you to define the W figure determination on measuring track or rolling road, K figure measure, can be used as speed simulator for the tachograph when checking the speedometer and odometer.

Hottest Digiprog III Digiprog 3 V4.88 Odometer Programmer with Full Software New Release

Hottest Digiprog III Digiprog 3 V4.88 Odometer Programmer with Full Software New Release

US$179.00
  • Item No. SM33
  • Out Of Stock

DigiProgIII is the worldwide leader in the production and marketing of digital speedo programming and correction software.
Updated to V4.88 now.

Universal Unlock Version Odometer Correction Tool Super TACHO PRO 2008

Universal Unlock Version Odometer Correction Tool Super TACHO PRO 2008

US$139.00
  • Item No. SM21-B
  • Out Of Stock

Tacho Universal
1. It is the most sold programming-device for digital speedometers worldwide.
2.The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation.
3.You can serve almost any vehicle with the Tacho Universal.

Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK

Tacho Pro 2008 July PLUS Universal Dash Programmer UNLOCK

Latest price:US$129.00
US$119.008% off
  • Item No. SM21
  • Out Of Stock

Tacho Pro 2008 July Version Universal Dash Programmer
1. It is the most sold programming-device for digital speedometers worldwide.
2.The system is a high-quality tool, which offers a maximum of flexibility and working comfort despite simplest operation.
3.You can serve almost any vehicle with the Tacho Universal.

Tacho Pro Plus V2008 July Version Main Unit

Tacho Pro Plus V2008 July Version Main Unit

Latest price:US$109.99
US$99.0010% off
  • Item No. SM21-B1
  • Out Of Stock

This is the main unit of tacho pro u2008 dashboard programming tool July version. Used for those customer who's main unit has been damaged or lost.

Tacho Pro Plus V2008 July Version Main Unit for Sale

Tacho Pro Plus V2008 July Version Main Unit for Sale

Latest price:US$108.00
US$89.0018% off
  • Item No. SM21-1
  • Out Of Stock

This is the main unit of tacho pro u2008 dashboard programming tool July version.It's used for those customer who's main unit has been damaged or lost.

Best Qulality KM TOOL Free for OPEL Shipping

Best Qulality KM TOOL Free for OPEL Shipping

US$21.99
  • Item No. SM26
  • Out Of Stock

For OPEL KM TOOL software is enriched in the possibility of changing dashboard in selected models. Set contains interface in professional plug OBD which is at the same time the key for activating the program, original CD with program and controllers.

Total 31 items, 20 items/p, current page 1/2.