J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator Plus Ktag/Kess V2 CPU Repair Chip with 60 Tokens

Out of Stock. History 6 sold. Item No. SO242-B

Buy Now: US$27.00

Recently the shipping is slower than usual.

DHL might be delivered in 14-20days.

Postal transportation has different degrees of delay depending on the country.

Let's wait for parcels in patience.

HealthCare On Sale!

Weight:
0.1KG     ( 0.22LB )
Returns:
Return for refund within 7 days,buyer pays return shipping. Read details »

Product Description

J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator Plus Kess V2 CPU Repair Chip with 60 Tokens, with this bundle, you can totally solve Kess V2 token problem.
J-Link JLINK V8+ ARM USB-JTAG Adapter Emulator Plus Kess V2 CPU Repair Chip with 60 Tokens
 
J-Link emulation is SEGGER company ARM core chip to support the launch of the JTAG emulator.With the IAR EWARM, ADS, KEIL, WINARM, RealView and other integrated development environment supports all ARM7/ARM9 core chip simulationThrough RDI interface and the integrated development environment for seamless connectivity, easy, convenient connections
Easy to learn, is learning and developing ARM best and most practical development tools.
 
Supported Operating Systems:
 
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows XP x64
Microsoft Windows 2003
Microsoft Windows 2003 x64
Microsoft Windows Vista
Microsoft Windows Vista x64
 
V8.0 is Improved Version of V7.0:

1. Improving the SWD interface circuit, the use of counterfeit JLINK V8 JTAG debug debug mode can be normal when debugging CORTEX-M3 core chips will not use SWD functionality, V7 hardware SWD part with the V8 not the same, if forced to switch to SWD mode, JLINK the main chip will be destroyed!JLINK V8 interface circuit using two-level converter chip, using a level converter chip will be fake V8!

2. V8.0 using two-color LED can indicate more work status, V7.0 only an LED indicator light.
3. To optimize the firmware structure and function of the firmware upgrade bootloader area to move to double the size of the application area Easy to add new features
4. Support for ARM11 better and faster than JLINK V7, is the first choice for ARM11.

Other Hightlights of J-LINK V8:

1. J-Link V8 use AT91SAM7S64, expanding the capacity of Flash and SRAM to facilitate future upgrades;
2. J-Link V8 improves the SWD interface, an increase of driver chips, (V6 and V7 in the SWD is a direct quote from the pin to the target CPU board);
3. J-Link V8 SWD improved control methods, V7 is the I / O direct-drive, V8 with a special method, there is not effective anyway V8`s SWD velocities slower than the V7
4. J-LinkV8 have three lights, one directed USB Communications, a direct target CPU, reset state, a direct 5V output is turned on V7 only 1 USB communication indicator
5. J-Link V8`s firmware update process is not DLL, and can not write the same as V7 Bootloader on a simple easy to crack V8`s Bootloader need to implement USB device connectivity;
 
J-Link ARM Features:
 
1. IAR EWARM integrated development environment seamlessly connected JTAG Emulator
2. Support all ARM7/ARM9 core chips, as well as cortex M3, including Thumb mode
3. Support for ADS, IAR, KEIL, WINARM, REALVIEW almost all of the development environment
4. Download speeds of up to ARM7: 600kB / s, ARM9: 550kB / s, through the DCC up to 800 kB / s
5. The maximum JTAG speed 12 MHz
6. Target board voltage range 1.2V-3.3V, 5V compatible
7. Auto speed recognition
8. Monitoring all JTAG signals and target board voltage Fully plug and play
9. Use the USB power supply (but not the target board power supply)
10. With a USB cable and 20-core flat cable
11. Support multi-device JTAG serial connection
12. Standard 20-core JTAG emulation connector
13. Optional 14-core JTAG emulation connector
14. Optional adapter for 5V targets board
 
J-Link Support for ARM Xores:
 
ARM7TDMI (Rev 1)
ARM7TDMI (Rev 3)
ARM7TDMI-S (Rev 4)
ARM720T * ARM920T
ARM926EJ-S
ARM946E-S
ARM966E-S
ARM11
Cortex-M3
 
Product Specifications
 
USB power supply, the whole current <50mA
USB Interface USB 2.0 full speed 12Mbps
Target board interfaces
JTAG (20P)
J-Link and target board serial data transfer speed between the 12MHz maximum
Supported target board voltage 1.2 - 3.3V, 5V compatible
Target board power supply voltage 4.5 - 5V (provided by the USB 5V)
Target board power supply current max 300mA, with overcurrent protection
°C ... +60°C">Operating temperature +5 ° C ... +60 ° C
°C ... +65 °C">Storage temperature -20 ° C ... +65
Humidity <90%
EMC EN 55022, EN 55024
 
Package List:
 
1x Jlink V8.0 emulator
1x 20P line of a standard JTAG
1x USB line
1 x Kess V2 CPU Repair Chip with 60 Tokens


Special Hot Products:


Hot-selling Brand Products:




Shipping method and delivery time:

Shipping from US/UK Amazon and Russia Warehouse: About 3-5 working days, we have hot-selling goods in the American warehouse and the British warehouse, the products are faster to transport and the price is cheaper, and there is no tax, which is very convenient for you.
DHL shipping: about 5-7 working days, in order to help you settle, we will help you declare a lower price in the invoice settlement. If the address is remote, the customer needs to pay for the remote transportation cost, otherwise we will ship by regular mail or Yanwen Express. Please remember to leave message if you have any special requirement.
Yanwen Express: about 10-15 working days, usually no tax on European countries or remote areas. The tax is prepaid and there is no customer tax when you arrive at the package.Therefore, European countries, Germany, Greece, Romania, Sweden, France and other countries have high tax rates. We recommend that you choose Yanwen Express as the first choice. If you need faster DHL, please contact us after payment, thank you


Contact Information:

E-mail: Sales@worldobd2.com 
Skype: wobd2.com 
What'sapp:+86 13372689373
Tidio Chat: 
Sales WorldOBD2.com
 
Buy more and Save more
Optional parts & accessories
Customers who viewed this item also viewed