WIFI Elm327 is a versatile, all-round high-tech automotive electronics products, with the vehicle ECU computer interface and data synchronization, achive the vehicle electronic control system monitoring; The internal functions of the vehicle will be setting through the vehicle ECU computer system, the driver can be more humane to use their own car.
KOLSOL ELM327 WIFI OBD2 Scanner V1.5 ELM327 Diagnostic Tool with Switch modified for Ford
1.The modified version of the ELM327 converts the HS-CAN and the MS-CAN.
2.It supports all OBD-II protocols.
3.Retrieve Fault Codes (DTCs) and clear Check Engine lights.
4.support FORD models open hidden function.
5.In addition to adding functionality to Ford, the device can also be used as a regular OBD2 / EOBD diagnostic on a vehicle.
6. Supported System: IOS ,Windows XP, Windows 7, Android, Symbian.
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL.
3.Display current sensor data, including:
l Engine RPM
l Calculated Load Value
l Coolant Temperature
l Fuel System Status
l Vehicle Speed
l Short Term Fuel Trim
l Long Term Fuel Trim
l Intake Manifold Pressure
l Timing Advance
l Intake Air Temperature
l Air Flow Rate
l Absolute Throttle Position
l Oxygen sensor voltages/associated short term fuel trims
l Fuel System status
l Fuel Pressure
||Chrysler, Dodge, Jeep, Ford, Chevrolet, Cadillac, Lincoln, Buick, Hummer, etc.
||Honda, Nissan, Lexus, Toyota, Mazda, Mitsubishi, Hyundai, Kia, Isuzu, Suzuki, Land Rover, Daewoo, Chery, BYD F3/F0, Infiniti, Subaru, etc.
||Audi, BMW, Citroen, Fiat, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Volvo, Volkswagen, Jaguar, Lamborghini, Maserati, Bentley, Rolls Royce, Porsche, Opel, Lancia, Mclaren , Ferrari, etc.
Other mainstream models that comply with the international standard obd2 agreement.
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)
SSID: WiFi OBD
Range: 50 ft (Line of sight)
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches
ScanMaster-ELM Software Install :
You should follow the steps shown in the pictures below:
Step1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
Step2: Double-click the ScanMaster-ELM_188.8.131.521 icon to start it.
Step3: You will see the following picture and click [Next].
Step4: Select the [I accept the agreement] option and click [Next] button.
Step5: Select the target location for the installation software.
Step6: Successful installation,there would be a shortcut on the desktop.
Step7: Open the software, set the complete user information and continue to operate.
Step8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
Step9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
You need to configure your PC or cellphone before you can use this software.
For example, on a PC you should follow the steps shown in the pictures below:
ScanMaster-ELM Software Usage:
Double-click the ScanMaster-ELM
icon to start it.
Click the button, choose WLAN in the drop list which resides in the tab named Communication.
Enter IP address 192.168.0.10 and port number 35000. Click [OK].
Now the software is ready to use.
Choose the language you need.
Click the [Connect] button in the lower left corner to connect the device.
The software is running
Read Trouble Codes
Read Live Data Grip
FoCCCus Software Usage:
Open the FoCCCus folder and you will see the FoCCCus icon.
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
These are what you’ll see when the software is running:
1PC x KOLSOL ELM327 WIFI OBD2 Scanner V1.5
1PC x CD-ROM
Special Hot Products:Hot-selling Brand Products:Shipping method and delivery time:Shipping from US/UK Amazon and Russia Warehouse: About 3-5 working days, we have hot-selling goods in the American warehouse and the British warehouse, the products are faster to transport and the price is cheaper, and there is no tax, which is very convenient for you.
DHL shipping: about 5-7 working days, in order to help you settle, we will help you declare a lower price in the invoice settlement. If the address is remote, the customer needs to pay for the remote transportation cost, otherwise we will ship by regular mail or Yanwen Express. Please remember to leave message if you have any special requirement.
Yanwen Express: about 10-15 working days, usually no tax on European countries or remote areas. The tax is prepaid and there is no customer tax when you arrive at the package.Therefore, European countries, Germany, Greece, Romania, Sweden, France and other countries have high tax rates. We recommend that you choose Yanwen Express as the first choice. If you need faster DHL, please contact us after payment, thank youContact Information:
Tidio Chat: Sales WorldOBD2.com